:

Here are 9 more reasons:

1. Sure grip handle keeps fingers above the Saw Blade.
Push stick holds wood down on table as you push forward. Will not hurt saw blade if accidentally cut.

2. Saw depth gauge accurate to .005".
Long base spans table insert to position off both sides of insert for greater accuracy.

3. Precision Router Depth Gauge accurate to .005".
Set router bits without trial & error for very accurate depth of cut.

4. Precision 30/60° Angle Gauge.
Set miter gauge as shown for a 60° cut off. Gauge is accurate as a draftsman's triangle.

5. 9 Inch Rule to position rip fence.
Position tool at rip dimension and slide rip fence to tool heel. Spans both slots and inserts in table saw.

6. Precision 45° Angle Gauge.
Set miter gauge positioning off both sides of blade for 45°. Accurate as a draftsman's triangle.

7. Precision 90° Square accurate to 1/100".
Accurately set saw blade, jigs, jointer, fence, etc. Check joints for square.

8. Center Finder Accurate to .005".
Position stock in recess and pencil a line. Rotate stock and pencil a second line. Center is at the "X".

9. 6 Inch Hook Rule.
Tool heel hooks firmly over the board's edge making measuring distance from an edge easy.

                 

$15.95